Wooden Camera Micro V-Mount Battery Slide Pro BGH1

Overview
The Micro V-Mount Battery Slide Pro is a versatile accessory that is compatible with a variety of cameras, including the Sony FS5, Sony FS7, and Panasonic EVA1. It uses an Anton/Bauer micro battery plate to provide a regulated 12v power supply to a 3-Pin LEMO compatible connector, making it easy to power your camera on the go. This plate can be attached to two 15mm LW rods and adjusted along the battery slide for convenience.

Not only does the Micro Battery Slide Pro allow for hot swapping between the onboard Panasonic AG-VBR59 battery and an external battery, but it is also compatible with both micro and full-sized batteries. Additionally, it features two D-Tap ports for accessory power and a digital fuse to protect against overloading. If the set current for accessories is exceeded, the fuse will cut off accessory outputs, but can easily be reset once the current load is reduced. Please note that the connectors used in this assembly are not manufactured by LEMO, but are made to the same specifications and are LEMO compatible.

Summary
Battery Mount: V Mount
Included in box
1x Micro V-Mount Battery Slide Pro

About the Wooden Camera Micro V-Mount Battery Slide Pro BGH1
Micro V-Mount Battery Slide Pro (Panasonic BGH1) utilizes an Anton/Bauer micro battery plate which provides a regulated 12v to a 3-Pin LEMO compatible connector for camera power. The plate attaches to two 15mm LW rods via integrated 15mm LW Rod Clamp and position can be adjusted along the battery slide.

The user retains the ability to hot swap between the onboard Panasonic AG-VBR59 and external battery. The Micro Battery Slide is compatible with both micro and full-sized batteries.

It also features two D-Tap (5.8 Amps) ports for accessory power as well as a digital fuse which cuts off accessory outputs, should the user exceed the set current for accessories, while leaving the camera powered. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again.

Connectors used in this assembly are not manufactured by LEMO but are made to the same specifications and are LEMO compatible.

Compatible Cameras Sony FS5, Sony FS7, Panasonic EVA1
Dimensions 145 x 115 x 40 mm (5.7 x 4.5 x 1.5 inch)
Weight 300g (0.6 lbs)

Compatible Cameras: Sony FS5, Sony FS7, and Panasonic EVA1