Audio Technica PRO70

Overview
The miniature condenser microphone is a versatile and reliable option for both vocal and acoustic guitar applications. It is equipped with a clothing clip and guitar mount, allowing for natural and articulate vocal reproduction when used as a clip-on lavalier. It also excels in pickup of acoustic guitar, making it a great choice for musicians.

The PRO70 microphone is designed to provide clear and comfortable sound without drawing attention to itself. It features a low-frequency roll-off switch to reduce pickup of room noise and a cardioid polar pattern for improved isolation of the desired sound source. It can be powered by either battery or phantom power and has corrosion-resistant contacts for durability. Overall, the PRO70 is a reliable and high-performing option for any musician or speaker.

Summary
Battery Mount / Type: AA
Connectivity: XLR-3M
Direction: Cardoid
Microphone Type: Lavalier Microphone
Included in box
1x PRO70 Microphone
1x AT8411 clothing clip
1x AT8444 instrument adapter
1x Power module
1x Windscreen
1x Battery
1x Soft protective pouch

About the Audio Technica PRO70
This miniature condenser microphone achieves full-sounding pickup and is known for outstanding consistency and dependable performance. Supplied with both a clothing clip and guitar mount, it provides natural and articulate vocal reproduction when used as a clip-on lavalier and excels in pickup of acoustic guitar. The PRO70 is designed to make music and speech clearly and comfortably audible, yet never draw attention to itself or its operation. The microphone is equipped with a low-frequency roll-off switch that allows for reduced pickup of room noise. The versatile PRO70 may be powered by either battery or phantom power. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 100-14,000 Hz
Low Frequency Roll Off 80 Hz, 8 dB/octave
Open Circuit Sensitivity Phantom: -45 dB (5.6 mV) re 1V at 1 Pa Battery: -45 dB (5.6 mV) re 1V at 1 Pa
Impedance: Phantom 200 ohms Battery: 200 ohms
Maximum Input Sound Level Phantom: 123 dB SPL, 1 kHz at 1% T.H.D. Battery: 123 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: Phantom 96 dB, 1 kHz at Max SPL Battery: 96 dB, 1 kHz at Max SPL
Signal to Noise Ratio 67 dB, 1 kHz at 1 Pa
Phantom Power Requiremens 11-52V DC, 2 mA typical
Battery Type 1.5V AA/UM3
Battery Current Life 0.4 mA / 1200 hours typical (alkaline)
Switch Off, on-flat, on-roll-off
Output Connector Integral 3-pin XLRM-type
Cable Integral 6′ (1.8 m), permanently attached between microphone and power module
Accessories AT8411 clothing clip; AT8444 instrument adapter; power module; windscreen; battery; soft protective pouch

Miniature condenser microphone is ideal for both vocal and acoustic guitar applications
Natural and articulate vocal reproduction when used as a clip-on lavalier – clothing clip included
Excels in pickup of acoustic guitar with included instrument adapter
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Switchable low-frequency roll-off
Corrosion-resistant contacts from gold-plated XLRM-type connector
Operates on battery or phantom power
6′ (1.8 m) cable permanently attached between microphone and power module